Recent Discussions
DHCP option to assign Cisco Wireless Controller
Hi Community, We have some sites that I'm trying to set a DHCP option to assign the controller IP to cisco 9105. I have a vendor rule on the AP's that get DHCP from our Microsoft DHCP servers. Was just curious if anyone has configured an option that works through Cato DHCP? Thank you.
X1700 Sockets running 22.0.19219 breaks HA
More of a caution, over the weekend we upgraded our sockets to 22.0.19219. No issues with our X1500's but sites running X1700's in an HA pair caused us some trouble. The HA keepalive no longer works, which was causing traffic to switch between Primary and Secondary sockets. Both sockets are showing as master. Engineering has discovered the root cause and are working on new version of the firmware, but wanted to let you all know in cause you plan to upgrade soon. Sockets can't reach each other via IP, but both sockets are pingable from other devices on the network.
Email alert when a domain is no longer accessible
We have a custom application configured with a set of FQDNs and a handful of destination IP's. Recently, one of the domains resolved to an IP that wasn't included in the application rule, preventing access to the domain. Is there a way to send an email alert when traffic to an allowed domain no longer makes it through? Something similar to Link Health Rule for destination IPs/Domains?
Auto disabling of "Secured Private Access" when user in office
In Cato, there is "Cato Connectivity Policy" wherein we can either allow "Allow Internet" or "Allow WAN and Internet" or "Block". We have MPLS in our offices and we wants to have only SWG i.e "Allow Internet" when user is in office so that internal applications go through MPLS and only internet traffic goes through Cato but when same user goes out of office than automatically both Internet and WAN traffic should go through the Cato. We had similar arrangement when we were with Netskope. In Netskope, there is a feature called “Enabling Dynamic Steering” [Refer https://docs.netskope.com/en/enabling-dynamic-steering/] wherein we could decide if users is “On-Premise” then what all traffic needs to be steered to Netskope and whether Private access needs to be enabled or not or only internet traffic is need to be steered. Can this be achieved in similar fashion ?NAT Settings
Hi all We have 2 regions that are using the same IP address. Our legacy network has NATed the IPs, so there is no IP duplication. We plan to migrate the legacy to CATO and tried to use NAT settings as in the kB, but it's not working. Region 1 (192.168.5.6/24) ⇒CATO ⇒ Azure Region 2(192.168.5.6./24)⇒NAT(10.x.x.x)⇒CATO⇒ Azure We configured NAT in the socket but PING or access to the Azure servers.
